Professional Products and Services LLC has earned the Joint Commission's Gold Seal of Approval as a Medical Supply Company located in Central Florida, USA.
Diamond Burs may look superficially similar at first glance, but closer examination reveals many differences. PPS only stock AlstonŽ diamond burs manufactured by SS White Group UK. Click to go to store
Each bur is manufactured from only the best materials and exceeds the stringent ISO, FDA, and CE standards. This gives the practitioner complete confidence in today’s modern surgery. Stainless steel to ISO specification is at the heart of every diamond bur. The shanks are turned on computer-controlled lathes to ensure true concentricity and balance to eliminate hand-piece damage to chucks and bearings. All sharp corners are rounded to be certain of proper diamond uptake during plating.
Plating is carried out under strictly controlled conditions, each plating cycle specifically tuned to the bur pattern to ensure even diamond coating and a strong plate bond. The diamond grits used are exclusively natural diamond. The material is selected to ensure maximum sharpness and the individual grains show good corners with little rounding of their surface.
Furthermore, where required each bur is heat-treated to give optimal hardness and rigidity for use without brittleness, which could lead to fracture during cutting. Finally, the burs are polished and finished before packing.
Each individual diamond bur is examined five times during manufacture with a final 100% inspection to ensure that you can have every confidence in diamond burs supplied by PPS.
Podiatry Burs